LNB Holders

!

Triax Multiblock Holder


TRIAX MULTIBLOCK LNB HOLDER FOR TD DISH RANGE ( ALSO SUITABLE FOR ORBITAL 80cm DISHES)
The Triax Multiblock LNB Holder is suitable to fit the Triax TD Range of Satellite Dishes. Holds up to 4 LNB's (Not included ) The bracket is very easy to fit and simply slides into the end of the feed arm.

Up to 4 LNB's can be adjusted to see any four satellites that are within an arc of between 3 - 20  degrees.

Example: 28.2E (Freesat/Sky), 19.2 E , 13E,  and so on ...

The bracket supports a minimum spacing between satellites of 4 degrees.

Specifications:

Colour: Black & Aluminum
LNB Angle: 3-20 deg

Larger picture

TRIAX Multiblock KIT for TD Dish Range

 

TRIAX MULTIBLOCK KIT FOR TD DISH RANGE
(C/W x4 COMPACT LNB'S & DISEqC SWITCH)

4 LNB'S IN A BLOCK WHICH ALSO COMES WITH DISEQ SWITCH TO BE USED WITH TRIAX TD RANGE DISHES.

Gilbertini Multi LNB Holder


Gilbertini Multi Feed Holder for up to 4 LNB's.Fits All Gibertini dishes and most likely many other makes of dish too (may require redrilling) allows instant access to up to 4 Satellites ideal for receivers with DiSEqC 1.0 or higher.

SKY LNB 40mm Adapter


This simple adapter will allow you to convert your existing  sky Minidish to accept the new generation of low noise (0.2dB) HDTV ready universal LNB's. This adapter is only compatible with the old version sky  dishes ( MK3) .

Vision Multi LNB Holder


VISION V81-20 LNB bracket
This special metal clamp will allow 1 or 2 additional LNBs to be added to the existing LNB to make up a multi LNB dish system. This model is designed for Vision dishes 80cm (C02660), 85cm (A90696) and 1m (A90713). Fits All Vision dishes as above and most likely many other makes of dish too (may require redrilling) ,ideal for receivers with DiSEqC 1.0 or higher.

Orbital Multi LNB Holder


9 degree extension arm LNB holder for Orbital 80cm and 1m dishes. Features 1 extra LNB holder.

Triax Twin Multi Lnb Holder


The Triax Twin Multi Lnb Holder is designed for use with the Triax 88cm & 1 Mtre dishes to add an extra LNB for reception of Astra 19 Degrees and Hotbird


Triax Single LNB Holder


Triax Single LNB Holder for Triax TD Range. This extra or replacement single LNB holder is for use with the TRIAX TD range of dishes

Televes Multi LNB Holder


9 degree extension arm LNB holder for Televes dishes . Dual LNB holder For 2 LNB (9º offset) in 80 cm offset dish ASTRA19.2 & ASTRA 28.2, or Astra 1 & Hotbird..