• DVB satellite-receiver 920-2150MHz
• Spectrum-analyzer with expanded spectrum
• DVB-S (Free to Air) and Analog TV-picture
• DVB-S FTA fully controlled via instrument or by the enclosed
  remote controll
• Digital readout of BER and SNR.
• Super bright 5” 16:9 TFT-LCD color display
• Exact signal-level readout in dBuV
• LNB voltage 13/18V, 22KHz tone switch
• DiSEqC according to level 1.0, 1.1 and 1.2
• KU- and C-band (normal/inverted video)
• Lots of memory positions and channel-lists setup
• Tuneable audio bandwidth 5.5-8.5MHz
• RS232 for PC-connection (up/download)
• Rechargeable Li-Ion battery
• Nice & small, only 3Kg complete with carrying case

Input frequency: 920-2150MHz.
Sat-TV min level in: About 35 dBuV (noise).
Sat-TV max level in: About 90 dBuV.
Sat-TV attenuation: 15 dB attenuator on/off.
Display of signallevel
(analog):
dB on LCD/monitor. Pitch-tone.
Sat-TV accuracy: ±1½ dB (at +20° C)
DVB-S Digital display of
signallevel:
S/N (signal/noise-ratio) BER (bit error rate)
TV standard: Multi TV/ (PAL, NTSC, SECAM).
KU- C-band: Yes, selectable.
Input impedance: 75 Ohm, BNC-con.
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus: On LCD 64x128.
TV-Channels: Displays both analog and digital (DVB-S)
TV-channels
Sat-TV power out: Yes, 13-18V.
Sat-TV control: 22 kHz, DiSEqC SatCr
DiSEqC Yes, all 1.0 and 1.1. 1.2
Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
PC-connection: RS232-output and PC-software.
Battery: Rechargable 12v, 3.5 amp/hour.
Weight: About 4 kg incl.battery.
Accessories: Nylon carrying-case.
Power-supply of 220v/13.5v, 1.7amp.
Car-charger, BNC/Fadapters