Digisat Pro Emitor Single Meter

Digisat Pro Emitor Single Meter , Digital Satellite Meter One in -One out. Useful tool to have when re-align or installing a dish. Please note that the meter we will supply is the Twin meter but only one Input will work, the LNB 1.
Full featured digital and analog satellite meter with LCD screen. Ideal for setting up a motorised or fixed dish system. The Digisat Pro offers Diseqc Switch testing and will check both LNB's at once in a Two-Satellite diseqc system. Furthermore the Pro can drive a Diseqc Motor East and West, ideal for moving the motor while you set up and track the arc on a motorised system. These meters are very sensitive & can detect weak signals. Works very well in Europe, America and Canada. Also useful for caravans etc.

  • 1 LNB's out
  • Can detect 13/18 V +22 kHz + DiSEqC from the receiver
  • Can transmit 22 kHz and DiSEqC to the LNB
  • Can be set up on a DiSeqC switch (13/18 V, 22 kHz and DiSEqC)
  • Can run a DiSEqC - motor (East/West) with DiSEqC 1.2
  • Digisat PRO Emitor

    Features ● Satfinder which measures one LNB´s at the same time.
    ● Measured information is displayed on the LCD.
    ● DiSEqC, 22 kHz, 13/18v and mA readout.
    ● Generate DiSEqC, 22 kHz and 13/18v to control LNB/switch.
    ● Also works as a 2-way switch (13/18v, 22 kHz or DiSEqC).
    ● Operates DiSEqC 1.2 actuators (East/West and reset).
    ● Built in beeper, higher tone - better signal.
    ● Very sensitive, easy to maximize weak and strong signals.
    ● 950-2150 MHz input frequency.
    ● F-connectors, CE-approved.
    Technical specification Input frequency: 2 x 950-2200 MHz.
    Input level: 20-100 dBuV.
    Through loss: 5 dB.
    Input impedance: 75 Ohm, F-connectors.
    Output impedance: 75 Ohm, F-connector.
    Short circuit protection: Automatic fuses on all inputs.
    Measuring method: Signal presentation on LCD
    display in form of thermometer
    scales or three digit number.
    Pitch-tone indication on loudspeaker.
    Max-level: Thermometer-scales showing
    max. Three digit numbers
    showing highest value. Highest
    tone on loudspeaker. Max holdfunction.
    Voltmeter: Voltmeter 0-30 volt. 0-900 mA.
    Indications: Voltage, current.
    22 kHz (on/off).
    MiniDiSEqC (toneburst).
    DiSEqC 1.0 and 1.1.
    Transmitting: 22 kHz (on/off).
    MiniDiSEqC (toneburst).
    DiSEqC 1.0 and 1.1.
    Actuator control: DiSEqC 1.2.
    Powersupply: From receiver via coaxial cable.
    External DC-power supply 12-
    18V Centerpin +.
    Power consumption: Appr. 35 mA without loudspeaker.
    Appr. 50 mA with loudspeaker.
    Weight: 0.1 kg.
    Dimensions: 145 x 55 x 20 mm.
    Options: Battery-pack.
    Carrying-case.
    __ifPurchasable__
    __endifPurchasable__