Emitor´s DIGIAIR ProT2 is developed in Sweden for exact alignment and adjustment
of terrestrial antennas for DVB-T and DVB-T2.
This is made for both analog (dBuV) and digital DVB-T/T2– COFDM.
DIGIAIR Pro T2 is microprocessor controlled, making it very reliable and accurate.
Signalstrength is presented on the LCD-display. In analog mode it shows a single
channel or six channels at the same time. You can also choose to view the signal in
In digital mode it displays the BER (bit error rate) and C/N (Carrier/Noise). Readout of
UCB (uncorrected bits) and CB (corrected blocks) is also easy to do.
Furthermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on
DIGIAIR Pro T2 is very sensitive and can detect even the weakest signals.
DIGIAIR Pro T2 can feed Voltage (0/5/12/24 Volt) to external active antennas this
feature is short-circuit protected by an automatic fuse.
DIGIAIR Pro T2 is charged via an external DC power-source of 10 -15 volt.