36v Motors

!

10 inch Stroke Linear Actuator SuperPowerJack DARL-3610+

10 inch ( 25.4cm ) SuperPower Jack DARL-3610 Actuator Motor 36V DC with reed switch sensor . This 10 inch Actuator 36v DC Motor is suitable to use with various sizes of satellite dishes to motorize your system.

This 36V DC Actuator is also ideal to use in various other automation projects such as Gate automation and Solar Panels and many more . Suitable to use Indoor and Outdoor.

12 inch SuperPower Jack Actuator HARL-3612+

12 inch ( 30.5cm ) SuperPower Jack HARL-3612 Actuator Motor 36V DC with reed switch sensor . This 12 inch Actuator 36v DC Motor by Moteck is suitable to use with various sizes of dishes to motorise your system. Screws and Mounting Clips are included in the package.


FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

18 inch SuperPower Jack Actuator

18 inch ( 45.7cm ) SuperPower Jack Actuator Motor 36V DC with reed switch sensor . This 18 inch Actuator 36v DC Motor by Moteck is suitable to use with various sizes of dishes to motorise your system. Screws and Mounting Clips are included in the package.


FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

24 inch SuperPowerJack Actuator

24 inch ( 61cm ) SuperPower Jack Actuator Motor 36V DC with reed switch sensor . This 24 inch Actuator 36v DC Motor by Moteck is suitable to use with various sizes of dishes to motorise your system. Screws and Mounting Clips are included in the package.


FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

Standard Polarmount

Standard PolarMount to use with an actuator., ideal to use with Standard Offset Dishes up to 1.2mt dish size. ( note that it might not be compatible with all dishes )

 

24" SuperPower Jack Heavy Duty Actuator

24” SuperPower Jack Heavy Duty SuperPowerJack Actuator Motor 36V .
FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

36" SuperPower Jack Heavy Duty Actuator

36” Heavy Duty SuperPower Jack Actuator Motor 36V .
FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

GeoTrack H-100 DiseqC 1.2 Actuator

 

The GEOTRACK H-100 is an Actuator for satellite dishes up to 1.20 m in diameter, the geotrack h-100 is using DiSEqC 1.2 controlled via the coaxial cable.

The GEOTRACK H-100 is mounted directly on the antenna mast or pole.
Included is all the installation material needed.

Larger picture

Triax Polarmount

Triax Polar Mount For TD Range
Polar mount replaces back bracketry of TD dishes for
ease of installation, Can be used on all TD dishes from
54cm to 110cm and will accept actuators up to 18".

 

GilbertiniPolar1mt

Gilbertini Polar Mount for 85cm & 1mt

Polar mount for conventional Jack Arms this Polar mount fits both the 85cm and 1 Metre Gibertini Dishes and comes with clear and easy instruction - it's robust precise construction means it will last well and perform better than most use with a 10 or 12 inch Jack to give all or most of the polar Arc
GilbertiniPolar1.2mt

Gilbertini Polar Mount for 1.2m & 1.5m

Polar Mount for the  Gibertini  1.2m & 1.5 m dish, you'll need this polar mount and the az/el mount, along with an 18" or 24" jack arm. Don't forget to use a subtantial pole to mount the motorised dish assembly. If in doubt, ask us for advice.. This Mount also fits the 1.2 Metre Gibertini dish (only needed if you are going to use a traditional Jack arm) this unit is robust and precise .