Combolook Color HD DVB S2/ T2 Spectrum Analyzer

Satlook Combolook Colour HD DVB S2/ T2  TV Aerial and Sat Meter Spectrum Analyser.. BEST TOOL TO INSTALL SATELLITE TV & AERIALS . The COMBOLOOK COLOR HD is a Swedish made SAT-TV/CATV instrument and spectrum-analyser. The unit is made for exact alignment and adjustment of satellite-dishes, aerial  antennas. It is also an excellent tool for working with Cable-TV networks. It is intended for professional use when high accuracy and precise information are needed.

ComboLook Color HD S2 T2 Leaflet

ComboLook Color HD S2 T2  Manual

 
It's easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to grasp and take just minutes to learn.

The COMBOLOOK COLOUR HD S2/T2/C is able to work with the return-path signals in Cable-TV networks (5-65 MHz)  according to the EN50083 standard. The TV-part presents the full range spectrum of 2-900 MHz which can be zoomed into smaller parts (min 13 MHz-span).

The TV-part is very sensitive and accurate. It presents signals ±1dB (at +20° C). There is a built in DVB-T receiver showing picture and BER + S/N-values. The SAT-part also has very high resolution and accuracy. It presents measured data ±1½ dB (at 20° C). The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarisation (“cross-polarisation”).

The SAT-part presents, under one of the sub menus, digital information like BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. The unit has a built in DVB-receiver which can store up to 100 Free To Air DVB-S channels in a favourite channel-list.

The COMBOLOOK COLOR HD HD S2/T2/C can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analogue and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery. The instrument is provided with a 5” color 16:9 LCD-monitor. Menus/help-displays are shown on the LCD screen (64x128) beside the monitor.

Features:

    Spectrum-analyser 2-900MHz and 950-2150MHz
    Presents full range and expanded spectrum
    Very high accuracy, CATV +/-1dB, SAT-TV +/- 1.5dB at 20°C
    Digital BER, MER and S/N(C/N)-ratio (DVB-S and S2, DVB-T and T2)
    DVB-S FTA receiver with picture
    DVB-T FTA receiver with picture
    DVB-C FTA receiver with picture
    Automatic Satellite identification
    Readout of NIT - gives SAT ID and TV/Radio-channel info
    Digital BER and S/N-ratio (DVB-S, S/2 and DVB-T)
    QPSK and 8PSK constellation diagram
    DVB-S (Free to Air) and SAT-analogue TV-picture
    Aerial power output, 0, 6, 12, 18 and 24V
    LNB voltage 13/18V, 22KHz tone switch
    Unicable SatCR
    DiSEqC according to level 1.0, 1.1 and 1.2
    Lots of memory positions for spectrum pictures
    RS232 for PC-connection (up/download)
    Rechargeable Li-Ion battery
    Nice & small, only 4Kg complete with carrying case

Technical Specification:

    Input frequency: 5-900 MHz and 920-2150MHz
    Sat-TV min level in: About 35 dBuV (noise)
    Sat-TV max level in: About 90 dBuV
    TV-part max input level, picture: 110 dBμV
    Spectrum: 120 dBμV
    Sat-TV attenuation: 15 dB attenuator on/off
    TV-part: attenuation: 45 dB in 1 dB step
    Display of signal level (analogue): dB on LCD/monitor
    Pitch-tone
    Sat-TV accuracy: ±1½ dB (at +20° C)
    TV-part accuracy: ±1 dB (at +20° C)
    TV-part resolution bandwidth: 1 MHz or 300 kHz
    TV-part video bandwidth: 100, 10 ,1 kHz or 100Hz
    DVB-S/S-2 Digital display of signallevel: S/N (signal/noise-ratio) BER (bit error-rate) Constellation (QPSK and 8PSK)
    Satellite-identification: Yes, by reading out the NIT in the bitstream
    Info about TV and Radio channels
    TV standard: Multi TV/ (PAL, NTSC, SECAM)
    TV text-TV (CEEFAX): Yes
    KU- C-band: Yes, selectable
    Input impedance: 75 Ohm, F-con
    Picture-screen: 5” 16:9 TFT-LCD monitor
    Menus: On LCD 64x128
    Memory: Lots of spectrum pictures can be stored with name
    Stored spectrum can be mixed for easy identification of satellite
    “Maxhold” function
    Favourite channels: Both analogue and digital frequencies can be stored (with name)
    100 DVB-S Free to Air channels can be stored in a favourite channel list
    DVB-T channels can be stored and viewed upon
    PC-connection: RS-232output and PC-software
    Sat-TV power out: Yes, 13-18V
    TV power out: On/Off - 5 volt and 15-24 volt
    Sat-TV control: 22 kHz, DiSEqC SatCr (UniCable)
    DiSEqC Yes, all 1.0 and 1.1. 1.2
    DiSEqC actuator: Built in positioner for DiSEqC 1.2,Toneburst on/off
    Battery: Rechargeable 12v, 3.5 amp/hour
    Weight: About 4 kg incl battery

Accessories:
    Nylon carrying-case
    Power-supply of 220v/13.5v, 1.7amp
    Auto Adapter cord (Car charger) 12V