36v Motors
!

10" SuperPower Jack Actuator

Moteck

10” SuperPower Jack Actuator Motor 36V . This 10" Actuator 36v Motor is suitable to use with various sizes of dishes to motorise your system.

FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

12" SuperPower Jack Actuator

Moteck

12” SuperPower Jack Actuator Motor 36V . This 12" Actuator 36v Motor is suitable to use with various sizes of dishes to motorise your system.

FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

18" SuperPower Jack Actuator

Moteck

18” SuperPower Jack Actuator Motor 36V . This 18" Actuator 36v Motor is suitable to use with various sizes of dishes to motorise your system.

FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

24" SuperPowerJack Actuator

Moteck

24" SuperPowerJack Moteck Actuator Motor 36v. This Actuator 36v Motor is suitable to use with various sizes of dishes to motorise your system.

FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

24" SuperPower Jack Heavy Duty Actuator

Moteck

24” SuperPower Jack Heavy Duty SuperPowerJack Actuator Motor 36V .
FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

36" SuperPower Jack Heavy Duty Actuator

Moteck

36” Heavy Duty SuperPower Jack Actuator Motor 36V .
FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor
Corrosion Resistant

GeoTrack H-100 DiseqC 1.2 Actuator

Geo Track

 

The GEOTRACK H-100 is an Actuator for satellite dishes up to 1.20 m in diameter, the geotrack h-100 is using DiSEqC 1.2 controlled via the coaxial cable.

The GEOTRACK H-100 is mounted directly on the antenna mast or pole.
Included is all the installation material needed.

Jaeger 99 Gold H-H 36v Motor

Jaeger
Larger picture

Jaeger 99 Gold H to H  Motor compatible with dishes up to 1mt. Best 36 volt motor available no need for polar mount fits 99% of dishes ( please check if not sure).

Standard Polarmount

polarmount1

Standard PolarMount to use with an actuator., ideal up to 1.2mt dish. ( note that it might not be compatible with all dishes)

 

Triax Polarmount

Triax
Larger picture

Triax Polar Mount For TD Range
Polar mount replaces back bracketry of TD dishes for
ease of installation, Can be used on all TD dishes from
54cm to 110cm and will accept actuators up to 18".

 

Gilbertini Polar Mount for 85cm & 1mt

Gilbertini
GilbertiniPolar1mt
Polar mount for conventional Jack Arms this Polar mount fits both the 85cm and 1 Metre Gibertini Dishes and comes with clear and easy instruction - it's robust precise construction means it will last well and perform better than most use with a 10 or 12 inch Jack to give all or most of the polar Arc
Polar mount for conventional Jack Arms this Polar mount fits both the 85cm and 1 Metre Gibertini Dishes and comes with clear and easy instruction - it's robust precise construction means it will last well and perform better than most use with a 10 or 12 inch Jack to give all or most of the polar Arc

Gilbertini Polar Mount for 1.2m & 1.5m

Gilbertini
GilbertiniPolar1.2mt
Polar Mount for the  Gibertini  1.2m & 1.5 m dish, you'll need this polar mount and the az/el mount, along with an 18" or 24" jack arm. Don't forget to use a subtantial pole to mount the motorised dish assembly. If in doubt, ask us for advice.. This Mount also fits the 1.2 Metre Gibertini dish (only needed if you are going to use a traditional Jack arm) this unit is robust and precise .