The new Emitor´s DIGIAIR Pro T2 is developed in Sweden for exact alignment and adjustment of terrestrial antennas for DVB-T and DVB-T2. This is made for both analog (dBuV) and digital DVB-T/T2– COFDM. DIGIAIR Pro T2 is microprocessor controlled, making it very reliable and accurate.
Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode.
Digiair Pro DVB T2 user manual
Digiair Pro DVB T2 leaflet
In digital mode it displays the BER (bit error rate) and C/N (Carrier/Noise). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do.
Furthermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker.
DIGIAIR Pro T2 is very sensitive and can detect even the weakest signals.
DIGIAIR Pro T2 can feed Voltage (0/5/12/24 Volt) to external active antennas this feature is short-circuit protected by an automatic fuse.
DIGIAIR Pro T2 is charged via an external DC power-source of 10 -15 volt.
The DIGIAIR PRO T2 operates with 8xAA rechargeable batteries. The unit will works for at least 2 hours with fully charged batteries.
Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design.
Please check the attached manual for the full specifications.
IPTV Systems->
Sport Viewing Cards
Meters and Tools
Specials ...
Installations
